how to open toyota corolla trunk without key
Move the front seats forward to create enough space for you to work in the rear side of the car. Take the key cylinder out of its socket.
2007 2013 Toyota Corolla How To Replace Trunk Latch Release Cable Luggage Cable Ntiza Port Mpagkaz Youtube
Toyota CorollaOwners Manual.
. Confirmed to work on 2003 2004 2005 2006 2007 2008. To do this and with the trunk open remove the cover holded by nine plastic pins. You can use the wrench to remove the back of the seats and bottom as well.
This method is for cars that have the trunk release on the floor by the drivers door. To support me or leave me a t. Toyota Corolla Owners Manual.
Opening the trunk from outside the vehicle. Turn the key. If the lock does not turn you need to disconnect the lock from the mechanism so that the driver seat lever can start working again.
The key hole will either be horizontal or verticle. Turn the key clockwise to release the trunk lid. Now lift the bottom side of the rear seats of the car to locate the bolts.
You can also open the trunk by pulling the bolts present in the rear seats of your Toyota Corolla. Turn lightly our you could break your key. Loosen the screw using the screwdriver through the hole from where you take off the plug.
Locate the trunk safety release lever in your trunk. While carrying the electronic key press the button on the trunklid. Take a glimpse into the cylinder hole and you will see an extra indentation this is where the cylinder goes.
Subscribe How to access your locked trunk from the back seat of your Toyota Corolla. While carrying theelectronic key press the button on the trunk lidWhen all the doors are unlocked with the power door lock systemthe trunk can be opened without carrying theelectronic key. You will have to get a new lock fitted though this is often cheaper and less hazardous than breaking a window and replacing that glass.
This pushed up on the carpet in the drivers footwell enough that the trunk release lever was pushed up and the trunk popped open. Put the black key in the trunk and turn it 90 degrees remove it. Click to see full answer.
Replace the screw of the license plate and open the trunk. After the trunk is open the next step is to approach the passenger part of the car. Dont forget to place the plug back in once youre done.
Feb 15th 2012 542 pm. Displace the key cylinder from the dentition. Remove the plug and use the tool at your disposal to push upwards through the hole.
Pull this lever and fold the seats down. You can do this by releasing the back latch of the seat. This controls the inside lever onoff for the trunk.
If your trunk release is malfunctioning climb into the back seat and locate the seat release lever. While carrying theelectronic key press the button on the trunk lidWhen all the doors are unlocked with the power door lock systemthe trunk can be opened without carrying theelectronic key. We had accidentally locked the keys in the car.
Starting in 2010 the. Opening the trunkfrom outside the vehicle. Using the screwdriver press the shaped dentition in the pocket by rotating the screwdriver.
You need the Black key. All you need to do is to bring it out. The rubber plug easily goes right back in the hole.
You can now climb directly into the trunk area of your vehicle. Pull softly or you will break it. Its located directly beneath the trunk latch next to the drivers seat.
Opening the trunk from outside the vehicle. When all the doors are unlocked with the power door lock system the trunkcan be opened without carrying the electronic key. For 2009 pull cable not lever.
It might take a few days of light lubing and light pressure with the key to free it. You cant post conmments that contain an email address. It may be located near the back or front of your trunk depending on your vehicle.
Now pull the door handle to reach the key cylinder. Fold forward the back seat and get into the trunk and use the lever in the latch of the trunck to open it. This pushed up on the carpet in the drivers footwell enough that the trunk release lever was pushed up and the trunk popped open.
How do you open the trunk on a Toyota Corolla without the key. If it is an emergency you can normally access the hatch or boot otherwise known as the trunk in the USA by punching the lock out using a large flat-headed screwdriver and a hammer. It will force the carpeting up and push on the trunk latch which will open the trunk and give you access to your keys.
The rubber plug easily goes right back in the hole. Approach the key cylinder by pulling the doors handle. It could be that your lock is seized.
The turnk will open. I was amazed it was that easy to get into the trunk. Once the component is out you have to find a new lock mechanism.
One way lets the inside lever work the other position stops it. When you feel that the tip of the screwdriver is touching the hook pull the hook by using the tip of your screwdriver to unlock your trunk. Let me know if it worked for your car.
I was amazed it was that easy to get into the trunk. Toyota Corolla Owners Manual. Use a screwdriver and put it into the hole.
Press and hold the switch. Try getting some graphite lock lube and putting it in the lock.
